Home » Pc Softwares » Drivers » TP-link » Routers Firmwares » Download TP-Link TL-WR940N Firmware [ Update Version ]

Download TP-Link TL-WR940N Firmware [ Update Version ]

Download TP-Link TL-WR940N Firmware and update your router firmware. This File Just 5 Mb or v3. just you need to click on download button and Start Download Without pay. All TP-Link Firmware you can Easily download from here.

You can also Download TP-Link TL-wr702n Firmware

450Mbps Wireless N Router TL-WR940N

  • 450Mbps wireless speed ideal for interruption sensitive applications like HD video streaming
  • Three antennas increase the wireless robustness and stability
  • Easy wireless security encryption at a push of WPS button
  • IP based bandwidth control allows administrators to determine how much bandwidth is allotted to each PC

Tp-Link Wireless N Router TL-WR940N Specification

  • Interface 4 10/100Mbps LAN PORTS, 1 10/100Mbps WAN PORT,
  • Button Wireless On/Off Button, WPS/Reset Button, Power On/Off Button
  • Antenna 3*5dBi Fixed Omni Directional Antenna
  • Wireless IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
  • Frequency 2.4-2.4835GHz
  • Wireless Security 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
  • System Requirement Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux
  • Supported Windows All

TP-Link TL-WR940N Firmware Installation Tips

450Mbps Wireless N Router TL-WR940N is a combined wired/wireless network connection device designed specifically for small business and home office networking requirements. With MIMO Technology, TL-WR940N creates an exceptional and advanced wireless performance, making it ideal for streaming HD video, making VoIP and online gaming. Also, WPS button on the sleek and fashionable exterior ensures WPA2 encryption, preventing the network from outside intrusions. Complying with the IEEE 802.11n standard, TL-WR940N can establish a wireless network.

Just you need to download Firmware From below given link. Now save this file to your hard drive. Then open your router page and go to upgrade setting in the menu. select downloaded file and click on upgrade button.  Now Your router going to upload and then auto go to restart.


  • Don’t Restart Router during Firmware Upgrade process
  • Don’t Install Firmware via Wireless

Tp-Link Wireless N Router TL-WR940N Details

  • Manufacture: TP-Link
  • Model: TP-Link TL-WR940N
  • File Size: 5.0 MB
  • Version: V3_150206
  • Source Via: TP-Link

Download For WinXP/Vista/7/8/8.1/10


error: Content is protected !!